Four Major Problems That Should Be Paid Attention To When Using Hydraulic Cylinders
2023-10-30
1. Running speed
Before using the hydraulic cylinder, it should be adjusted according to the working environment and operating objects used, and according to the actual working conditions. The running speed of the entire hydraulic equipment is not as fast as possible, but it must also meet the safe operating speed range of the hydraulic cylinder and cannot exceed the regulations. Otherwise, it will cause fail-safe problems. And because the high-speed operation exceeding the standard will also cause problems in each line and stop the hydraulic cylinder from working.
2. Keep the system oil clean
When the hydraulic cylinder is in operation, the system has high requirements on the purity of the oil, and requires the operator to strictly control the cleanliness of the oil to avoid contamination during daily use, and to regularly check the performance of the oil to ensure the entire operation process of the equipment The smooth progress of the medium, and after the oil is polluted, it must be finely filtered or replaced with a new working oil.
3. Check the stability of the equipment before use
It is very important to check the normal function of the hydraulic cylinder before each use, especially whether all the solid parts are intact and not loose, which can directly affect the safety of the entire operation, because in continuous use It is inevitable that the equipment will become loose during the process, so it is very important to conduct a proper stability check before use.
4. Maintenance after work
Although the material performance of the hydraulic cylinder itself is good during use, the piston part is often stretched out after being installed on the body. In order to make the pistons operate more flexibly, it is necessary to add butter frequently for maintenance, especially for the exposed parts of the piston rod. Parts are also heavily greased to prevent rust from affecting movement.
