How To Prevent And Treat Leaks In Hydraulic Cylinders

2023-10-30

According to the introduction of hydraulic cylinder maintenance personnel, if you want to achieve a leak-proof effect, you must reduce the number of flanges and oil joints during installation, and cut off the leakage from the source. Moreover, the leakage rate of traditional valves is high. The editor recommends that plate-type valve stacks be selected in the early stage of design, and various integrated blocks should be installed in a combined form, which can greatly reduce the number of leakage points in the hydraulic cylinder pipelines. The most important measure to prevent leakage of hydraulic cylinders.
Second, the details can also be optimized to reduce the occurrence of hydraulic cylinder leakage. For example, the hydraulic system and the hydraulic valve table can be installed at a position relatively close to the actuator to shorten the total length of the hydraulic pipeline. , Its basic principle is also to reduce the number of joints, thereby reducing the risk of leakage. It is the same, but there are differences in details.
Third, pay attention to the principle of hydraulic cylinder leakage. Most of them are caused by mechanical vibration, which directly or indirectly damages the system, and eventually causes the joint to loosen and cause leakage. Therefore, to prevent hydraulic shock, it is necessary to avoid rapid steering. If the working condition of the cylinder system permits, the reversing time can be extended, and a buffer groove can be added on the valve core to extend the control valve with a long reversing time, so as to reduce vibration and avoid the risk of leakage.

Prev : Hydraulic Cylinder for Cement Plant Equipment

Next : What Are The Reasons For The Failure Of The Hydraulic Cylinder?

Contact us to discuss your fertilizer project with our experts